Categories
Rako Approved Installers Golden Ear Sonos Authorised Reseller Need Help? Review Centre
RB Vision
  • 01. Sonos
  • 02. Rako
  • 02. Epson
  • 04. Sonance
  • Hikvision
  • 05. Launch Port
  • 07. WyreStorm
  • 10. GoldenEar
  • 05. Peerless
  • 01. Draytek
  • 12. Maxilux Led
  • 09. CYP

Rako RMS800 (RDS800) Switching Control Module

The RMS800 in-line RF switch module for non-dimmable loads. Connected in-line before the first lighting fitting the RMS800 enables switching of up to 800VA of non-dimmable loads. Ideal for extractor fans, LEDs, non-dimmable fluorescents. Controlled from any Rako Rakom RF device, for example the RCP/RCM push button RF wall-plates.

Designed to fit in a ceiling void or cupboard, the RMS800 module can control up to 800VA of mains non-dimmable lighting loads. The unit can also be used for exterior lighting control applications, with the use of a weatherproof IP rated enclosure. 16 Scene memory capacity, can be fully integrated into Rako wired systems. Easy set-up and manual On/Off control using the set-up button. Full rising clamp terminals and mounting bracket for easy installation. Programmed using either an RCM/RCP RF wall-plate or RASOFT PC software suite, the RMS800 stores the House, Room and Channel address plus 16 preset scene levels in a non-volatile memory. The RMS800 can be controlled from any Rako transmitter such as RCM/RCP wallplates, RAH hand-helds and Bridge modules and forms the foundation of any Rako wireless scene-set system.

 

Brand: Rako
Product Code: RMS800
Availability: In Stock
Price: £128.40
Ex Tax: £107.00
Rako RMS800 (RDS800) Switching Control Module

 

Dimensions - 160x50x36mm

Input supply - 230V AC +/-10% 50Hz

Weight - 230g

Housing - UL V0 material

Climate range - Temperature +2C to +40C

Humidity +5% to 95% non condensing

Connections - 4 way screw terminals for mains power

Protection - Auto resetting over current protection

Auto thermal shutdown

Voltage surge protection

Load types - All non dimmable lighting loads

Extractor fans

Water pumps (garden water features)

Minimum load -

Maximum load - 800w

Terminal sizes - 1.5mm2 - Stranded

2.5mm2 - Solid

Standards - Emissions - EN61000-6-3 : 2001

Immunity - EN61000-6-1 : 2001

Communication - Rakom coded fm radio, 433.9MHz

Memory Flash - memory (non volatile)

The RMS800 in-line RF switch module for non-dimmable loads. Connected in-line before the first lighting fitting the RMS800 enables switching of up to 800VA of non-dimmable loads. Ideal for extractor fans, LEDs, non-dimmable fluorescents. Controlled from any Rako Rakom RF device, for example the RCP/RCM push button RF wall-plates.

Designed to fit in a ceiling void or cupboard, the RMS800 module can control up to 800VA of mains non-dimmable lighting loads. The unit can also be used for exterior lighting control applications, with the use of a weatherproof IP rated enclosure. 16 Scene memory capacity, can be fully integrated into Rako wired systems. Easy set-up and manual On/Off control using the set-up button. Full rising clamp terminals and mounting bracket for easy installation. Programmed using either an RCM/RCP RF wall-plate or RASOFT PC software suite, the RMS800 stores the House, Room and Channel address plus 16 preset scene levels in a non-volatile memory. The RMS800 can be controlled from any Rako transmitter such as RCM/RCP wallplates, RAH hand-helds and Bridge modules and forms the foundation of any Rako wireless scene-set system.

 

For more information, click the link below:

RMS800 Datasheet

RMS800 Installation Manual

  • 01. Sonos
  • 02. Rako
  • 02. Epson
  • 04. Sonance
  • Hikvision
  • 05. Launch Port
  • 07. WyreStorm
  • 10. GoldenEar
  • 05. Peerless
  • 01. Draytek
  • 12. Maxilux Led
  • 09. CYP